You are well aware that skirting boards give an ideal finish to the meeting between the floor and walls, while the wall covings ensure a harmonious meeting between the ceiling and walls. However, this does not mean that the space between them cannot be filled. There is immense potential in this space and the decorative moulding is the perfect ally to let creativity flow through the walls. Widely used in harmonious divisions, the moulding, for a long time, was created from wood and plaster, two unsustainable materials.
Santa Luzia offers an ecological alternative for Decorative Mouldings, just as it does for the brand's Skirting Boards and Architraves, which are manufactured from the recycling of plastic residues such as Styrofoam® products, technically known as expanded polystyrene or by the acronym EPS, for instance. The brand's Decorative Mouldings leave the factory painted in white or black, resist water and are immune to pests and mold. The 2.4 meter long bars have heights ranging from 2.9 cm, for delicate applications, up to 6 cm, for prominent demarcations.
1. Product and Company Identification
Product: Polystyrene Mouldings
Product type: Painted – 96% Recycled Polystyrene and 4% Virgin Polystyrene, Painted in solvent-based acrylic paint.
Company: Santa Luzia
Address: Rua Heriberto Effting, 555 – Bairro Santa Luzia, 88750-000 – Braço do Norte – SC - Brazil
2. Product Features/ Characteristics
2.1. Thermal Expansion
Thermal expansion is a specific characteristic of materials, that is, they all undergo dimensional changes as a result of temperature variation. This variation is different for each material, but it is always existant. Therefore, we can calculate this variation for each temperature difference as a function of product length.
Santa Luzia polystyrene products have a characteristic thermal expansion of 0.15% for a temperature variation of 25 °F.
2.2. Water absorption
The evaluation of water absorption of Santa Luzia products was made by varying the weight and dimensions of the product after immersion in water for 24 hours. The variation in the weight of the products was (0.91 ± 0.11)% (ASTM D 570 -98). This variation does not change the characteristics of the product. With respect to dimensional variation, this does not occur as a function of water absorption.
The products have the characteristic of spreading flame. The average flame surface propagation index (IP) achieved by the material was 432, corresponding to class E of the test method (NBR 9442).
2.4. Exposure to Coastal Environments
Santa Luzia polystyrene products do not present any type of alteration when exposed to coastal environment conditions, in other words, they are indicated for use in these places.
2.5. Resistance to Cleaning Products
The indicated cleaning products are: neutral detergent, diluted bleach (above 50% diluted in water) and ethyl alcohol. The application must be done in such a way as not to allow these products to be in direct contact for a time longer than 10 minutes.
The cleaning of the products must be done with the aid of a soft cloth or sponge.
Note: The tests carried out for the preparation of the technical sheet were carried out on painted mouldings. If other types of paint are applied, the manufacturer's recommendations must be observed.
2.6. Pest Resistance
Pests such as termites, borers and other insects do not feed on this product.
2.7. Application Ambient
The products are not suitable for use in ambients where there is direct incidence of solar radiation, as it can cause changes to it, more so due to its paint.
This product can be used in damp ambients, as it does not change when exposed to moisture, as shown in item 2.2.
The application of these products is indicated for ambients with a temperature below 50 °C, remembering that any temperature variation will subject the products to thermal expansion as shown in item 2.1 of this document.
3. Finishing and Applying Paint
Line mouldings are painted with solvent-based acrylic paint from factory.
If you want to change the color of the moulding, that is, repaint, it is suggested to follow the guidelines described below:
a) It is suggested that the paint used for re-painting the products is the same used for the openings, in order to minimize possible variations in tone.
b) The use of sandpaper or any other procedure that removes the paint from the original profile is prohibited, as the quality of the repainting may be compromised.
c) The product is prepared to receive acrylic, polyurethane and synthetic solvent-based paint. The performance of the same paint can differ from manufacturer to manufacturer and each type of finishing paint has a specific performance. For more information, contact the manufacturer of the paint to be used.
It is important to emphasize that the performance of the new finish will depend on the quality of the paint and the application, and the manufacturer's specifications must be considered.
4. Presentation, Packaging and Storage
The products are presented in bars measuring 2.4 meters in length, packed with shrink-wrapped plastic in cardboard boxes. Each package contains the product reference and installation instructions.
Storage can be done both vertically and horizontally, as long as it does not cause the mouldings to spread.
Note: Mouldings with special lengths can be made in accordance with the Sales Policy, and the type of packaging can also be negotiated on a case-by-case basis.